 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Rev. 2.0 BSL207SP OptiMOS-P Small-Signal-Transistor Feature * P-Channel * Enhancement mode * Super Logic Level (2.5 V rated) * 150C operating temperature * Avalanche rated * dv/dt rated Product Summary VDS RDS(on) ID -20 41 -6 P-TSOP6-6 V m A 4 5 6 3 2 1 Type BSL207SP Package P-TSOP6-6 Ordering Code Q67042-S4066 Marking sPA Gate pin 3 Drain pin 1,2, 5,6 Source pin 4 Maximum Ratings,at Tj = 25 C, unless otherwise specified Parameter Continuous drain current TA=25C TA=70C Symbol ID Value -6 -4.8 Unit A Pulsed drain current TA=25C ID puls EAS dv/dt VGS Ptot Tj , Tstg -24 44 -6 12 2 -55... +150 55/150/56 Avalanche energy, single pulse ID =-6 A , VDD=-10V, RGS =25 mJ kV/s V W C Reverse diode dv/dt IS =-6A, VDS=-16V, di/dt=200A/s, Tjmax =150C Gate source voltage Power dissipation TA=25C Operating and storage temperature IEC climatic category; DIN IEC 68-1 Page 1 2004-02-02 Rev. 2.0 Thermal Characteristics Parameter Characteristics Thermal resistance, junction - soldering point SMD version, device on PCB: @ min. footprint @ 6 cm 2 cooling area 1) BSL207SP Symbol min. RthJS RthJA - Values typ. max. 50 230 62.5 Unit K/W Electrical Characteristics, at Tj = 25 C, unless otherwise specified Parameter Static Characteristics Drain-source breakdown voltage VGS =0, ID=-250A Symbol min. V(BR)DSS VGS(th) IDSS IGSS RDS(on) RDS(on) -20 -0.6 Values typ. -0.9 max. -1.2 Unit V Gate threshold voltage, VGS = VDS ID =-40A Zero gate voltage drain current VDS =-20V, VGS =0, Tj =25C VDS =-20V, VGS =0, Tj =150C A -0.1 -10 -10 43 29 -1 -100 -100 65 41 nA m Gate-source leakage current VGS =-12V, VDS =0 Drain-source on-state resistance VGS =-2.5V, ID =-4.9A Drain-source on-state resistance VGS =-4.5, ID =-6A 1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70 m thick) copper area for drain connection. PCB is vertical without blown air; t 5 sec. Page 2 2004-02-02 Rev. 2.0 Electrical Characteristics, at Tj = 25 C, unless otherwise specified Parameter Dynamic Characteristics Transconductance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time gfs Ciss Coss Crss td(on) tr td(off) tf VDD =-10V, VGS =-4.5V, ID =-1A, RG=6 VDS 2ID RDS(on)max , ID =-4.8A VGS =0, VDS =-15V, f=1MHz BSL207SP Symbol Conditions min. 7 - Values typ. 14 1007 410 332 9 17 42 53 max. 14 26 63 76 Unit S pF ns Gate Charge Characteristics Gate to source charge Gate to drain charge Gate charge total Gate plateau voltage Reverse Diode Inverse diode continuous forward current Inverse diode direct current, pulsed Inverse diode forward voltage Reverse recovery time Reverse recovery charge VSD trr Qrr VGS =0, |IF | = |ID | VR =-10V, |IF | = |lD |, diF /dt=100A/s Qgs Qgd Qg VDD =-10V, ID =-6A - -1.7 -7.1 -13.3 -1.6 -2.6 -10.7 -20 - nC VDD =-10V, ID =-6A, VGS =0 to -4.5V V(plateau) VDD =-10V, ID =-6A V IS ISM TA=25C - -0.9 29 12 -2.3 -24 -1.3 36 15 A V ns nC Page 3 2004-02-02 Rev. 2.0 1 Power dissipation Ptot = f (TA ) 2.2 BSL207SP BSL207SP 2 Drain current ID = f (TA ) parameter: |VGS | 4.5 V -6.5 BSL207SP W 1.8 A -5.5 -5 1.6 -4.5 Ptot ID 20 40 60 80 100 120 1.4 1.2 1 0.8 0.6 -4 -3.5 -3 -2.5 -2 -1.5 0.4 0.2 0 0 -1 -0.5 C 160 0 0 20 40 60 80 100 120 C 160 TA TA 3 Safe operating area ID = f ( VDS ) parameter : D = 0 , TA = 25 C -10 2 BSL207SP 4 Transient thermal impedance ZthJS = f (tp ) parameter : D = tp /T 10 2 BSL207SP A = V (o DS n) /I D DS K/W tp = 130.0s 10 1 -10 1 R Z thJS 1 ms 10 0 ID 10 ms -10 0 10 -1 D = 0.50 0.20 10 -2 0.10 0.05 -10 -1 DC 10 -3 single pulse 0.02 0.01 -10 -2 -1 -10 -10 0 -10 1 V -10 2 10 -4 -7 10 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 VDS Page 4 tp 2004-02-02 Rev. 2.0 5 Typ. output characteristic ID = f (VDS ); Tj=25C parameter: tp = 80 s 60 A Vgs = -3.5V Vgs = -3V BSL207SP 6 Typ. drain-source on resistance RDS(on) = f (ID ) parameter: VGS 0.065 Vgs = -2V Vgs = -2.2V 50 45 0.055 0.05 0.045 0.04 0.035 Vgs = -2.5V - ID 40 35 30 25 20 15 10 5 0 0 1 2 3 Vgs = -4V Vgs = -4.5V Vgs = -6V Vgs = -10V Vgs = -2.5V Vgs= - 3V Vgs = - 4V Vgs = - 4.5V Vgs= - 5V Vgs = - 6V Vgs= - 8V RDS(on) Vgs = -2V 0.03 0.025 0.02 Vgs = - 10V 0.015 4 5 6 7 8 V 10 0.01 0 4 8 12 16 20 24 A 30 - V DS - ID 7 Typ. transfer characteristics ID= f ( VGS ); |VDS | 2 x |ID| x RDS(on)max parameter: tp = 80 s 22 A 8 Typ. forward transconductance gfs = f(ID); Tj=25C parameter: tp = 80 s 20 18 16 S - ID 14 12 10 g fs V 12 8 8 6 4 2 0 0 0.5 1 1.5 2 3 0 0 4 8 12 16 A 4 24 - V GS - ID Page 5 2004-02-02 Rev. 2.0 9 Drain-source on-resistance RDS(on) = f(Tj ) parameter: ID = -6 A, VGS = -4.5 V 55 BSL207SP 10 Gate threshold voltage VGS(th) = f (Tj) parameter: VGS = VDS , ID = -40 A 1.4 V m - VGS(th) 98% RDS(on) 45 1 98% 40 0.8 typ. 35 typ. 0.6 2% 30 0.4 25 0.2 20 -60 -20 20 60 100 C 160 0 -60 -20 20 60 100 C 160 Tj Tj 11 Typ. capacitances C = f (VDS) parameter: VGS =0, f=1 MHz 10 4 12 Forward character. of reverse diode IF = f (VSD ) parameter: Tj , tp = 80 s -10 2 BSL207SP A pF -10 1 C Ciss 10 3 Coss IF -10 0 Tj = 25 C typ Crss Tj = 150 C typ Tj = 25 C (98%) Tj = 150 C (98%) 10 2 0 5 10 V 20 -10 -1 0 -0.4 -0.8 -1.2 -1.6 -2 -2.4 V -3 - VDS VSD Page 6 2004-02-02 Rev. 2.0 13 Typ. avalanche energy EAS = f (Tj ), par.: ID = -6 A VDD = -10 V, RGS = 25 45 mJ BSL207SP 14 Typ. gate charge |VGS| = f (QGate ) parameter: ID = -6 A pulsed 12 V 10 35 30 25 20 15 10 5 0 25 9 - VGS E AS 8 7 6 5 4 3 2 1 0.2 VDS max. 0.5 VDS max. 0.8 VDS max. 50 75 100 C 150 0 0 4 8 12 16 20 nC 28 Tj |QGate| 15 Drain-source breakdown voltage V(BR)DSS = f (Tj ) -24.5 BSL207SP V -23.5 V (BR)DSS -23 -22.5 -22 -21.5 -21 -20.5 -20 -19.5 -19 -18.5 -18 -60 -20 20 60 100 C 180 Tj Page 7 2004-02-02 Rev. 2.0 Published by Infineon Technologies AG, Bereichs Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. BSL207SP Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Reprensatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 8 2004-02-02 |
Price & Availability of BSL207SP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |